In aquariums with live rock and corals, stagnant areas (dead spots) and piles of toxic waste products can accumulate--seriously affecting the health of your animals. The Natural Wave pump timer creates alternating water currents in your aquarium when connected to pumps or powerheads. These alternating water currents reduce dead spots and can keep detritus (waste) in suspension, allowing it to be more easily captured by filters. Circulation provided by the Natural Wave pump timer also stimulates live corals by periodically flushing waste products away. In addition, the surging currents created by use of the Natural Wave pump timer mimic actual wave patterns in the ocean and provide a more realistic environment for your corals. The Natural Wave is a multi-cycle pump timer with six outlets. Two of the six circuits that have timing patterns alternate on/off with adjustable periods of 20 seconds to three minutes. The third circuit has a double cycle of 40 seconds to six minutes. Connect the pumps of your choice and design the best wave patterns for your aquarium. These circuits provide the optimum flexibility for you to create random circulation patterns. An illuminated indicator lets you know the cycling times. The remaining three outlets are standard power outlets and can be used for accessories such as filters, lights, or heaters.
Specifications: electrical rating: 125 volts, 15 amps, 60 hz, timed outlets 100 watt maximum per circuit. Natural Wave plugs into any 110/120 volt grounded outlet and has a 15 amp push button circuit breaker for overload protection. Instructions: Install three or more pumps in the aquarium at various locations to produce opposing currents. Outlets #1 and #3 alternate on and off so flows from these pumps should be in opposite directions. Outlet #2 follows an on/off cycle twice as long and should be directed toward suspected dead spots. Each timed circuit can handle up to 100 watts. To control the cycle period, rotate the adjustment knob from 20 seconds to three minutes. The actual cycle time can be measured by timing the indicator light and adjusting as desired. The Natural Wave pump timer should be located in a dry location, free from the risk of splash or salt spray. All electrical cords plugged into the strip should utilize a drip loop to prevent water from running into the outlet.