One of the biggest joys of owning a terrarium is peering through the glass and watching your amphibians or reptiles go about their day. When viewing terrarium pets, you don’t want to see grimy water or have to plug in air fresheners to mask the smell of a dirty tank. To save you that trouble, the TetraFauna ReptoFilter for Frogs, Newts & Turtles is an effective amphibian and reptile tank filter.
The TetraFauna ReptoFilter for Frogs, Newts & Turtles will keep the water in your terrarium clean, which will promote a healthy environment for your pet and make viewing a pleasure. The unique design of this frog, newt and turtle tank filter incorporates three stages of filtration for optimum performance. For your convenience, the TetraFauna ReptoFilter for Frogs, Newts & Turtles also uses easily replaceable ReptoFilter cartridges.
This turtle tank filter is easy to set up. The suction cups allow you to attach the reptile tank filter on the back wall of your terrarium. The small size of this turtle tank filter makes it easy to conceal with a plant, rocks or other decoration and create an instant waterfall. The TetraFauna reptile tank filter is ideal for shallow setups and works in as little as two inches of water.
The TetraFauna ReptoFilter provides three stages of filtration to keep the water in your terrarium crystal clear and clean:
Important safety instructions. Read and follow all safety instructions. Danger: Special care should be taken to avoid possible electric shock, since water is employed in the use of aquarium equipment. Do not attempt any repairs by yourself; return the appliance to an authorized service facility for service or discard the appliance.
WARNING: To guard against injury, observe basic safety precautions, including the following: 1. If the appliance shows any sign of abnormal water leakage, immediately unplug it from the power source. 2. Carefully examine the appliance after installation. Unplug the appliance if there is water on parts not intended to get wet. 3. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning, or if it has been dropped or damaged in any manner. 4. To avoid getting the appliance plug or receptacle wet, position the aquarium to the side of a wall-mounted outlet in order to prevent water from dripping onto the plug or outlet. Arrange a "drip loop" for each cord connecting an aquarium appliance to an outlet. (See Illustration A.) The "drip loop" is the part of the cord below the level of the outlet (or if using an extension cord, below the level of the connector) that prevents water from traveling along the cord and coming in contact with outlet. 5. If the plug or outlet should get wet, don't unplug the cord. Disconnect the fuse or circuit breaker that supplies power to the appliance. Once the power has been disconnected, unplug the cord and examine it for the presence of water in the outlet. 6. Always unplug the appliance from an outlet when it is not in use. Also unplug it before cleaning, and prior to disconnecting or attaching parts. Never yank the cord to pull the plug from the outlet. Grasp the plug and pull to disconnect. 7. Do not use an appliance for anything other than its intended use. Do not use attachments that are not recommended or sold by the manufacturer; they may cause an unsafe condition. 8. Do not install or store the appliance where it will be exposed to the weather or to temperatures below freezing. 9. Make sure the appliance is securely installed before operating it. 10. If an extension cord is necessary, use a cord with a rating that matches or exceeds the rating of the appliance. A cord rated for fewer amperes or watts than the appliance rating may overheat. Arrange the cord so that it will not trip anybody, and that it will not be pulled in any way. 11. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, the plug will fit in polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug, If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to defeat this safety feature. 12. Avoid injury, do not touch moving parts. 13. Supervise children closely when they are near or using the appliance.
Set-up and Installation of your new ReptoFilter. 1. Insert suction cups as shown. When pressed firmly and twisted, the suction cups will fit snugly into the holes in the back of the ReptoFilter. If they don't go in easily, a small screwdriver can be used to gently guide the suction cups into the holes. 2. Insert the filter cartridge and foam grid as shown. (Note: The front of the foam grid is marked "front" and should face the front of the filter.) 3. Insert ReptoFilter inside the aquarium and press the suction cups against the aquarium glass. Drape wire over the aquarium wall. 4. The lip of the ReptoFilter should be above the water level, and the bottom of the filter should be submerged in at least two inches of water. When positioning plants and other items, take care to leave a 1/2" clearance around the filter's intake area. 5. Attach ReptoFilter lid.
Internet Price: $29.99 - $39.99 Today's Price: $23.99 - $32.33 (Save up to 20%)
Shop All Products By Tetra
Usually Leaves Warehouse the Next Business Day
3.25" L X 8" H
For Aquariums up to 20 gallons
5" L X 9.5"H
For Aquariums up to 55 gallons
Here's How it Works:
*Valid on Repeat Delivery eligible products, products subject to change.
$3.19 to $5.59
$11.04 to $25.49
$102.17 to $119.99