Innotek Free Spirit Advanced 2-Dog Digital Advanced Trainer

It took Innotek’s professional trainer know-how to make this remote the easiest way to control two dogs at the same time. With the digital display, you’ll never have to guess which dog you are training or exactly what level he is on. This system has all of the multiple-level flexibility of the single dog systems, only now you can enjoy two well-behaved dogs at once.

• Advanced digital display
• 15 levels of stimulation
• Continuous or momentary tap stimulation
• 1000 yard range
• Waterproof collar
• Low battery indicator
• Rechargeable NiMH batteries

Digital Advanced Trainers Understanding the Transmitter: This handled device signals the collar receiver to produce stimulation and/or tone. The transmitter is water-resistant and should not be immersed in water or placed in a dishwasher.
ADV-1002 Users: Dog 1 - Provide stimulation for Dog 1. Uses continuous stimulation by the time you press the button. For short tap, press and release the button. For a longer signal, hold the button down. A maximum of 10 seconds may be applied before the safely feature to prevent over-correction engages. After 10 seconds, stimulation will be locked out for another 10 seconds. Dog 2 - Provide stimulation for Dog 2. Also uses continuous stimulation. Level Up -increases stimulation level for the dog indicated in that column. Level Down - decreases stimulation level for the dog indicated in that column.
The Digital Display. When either the continuous or momentary buttons are pushed, the display will indicate the stimulation level being transmitted. For ADV 1002 users, after the stimulation button is released, the dog number (Dog1/Dog2) and stimulation level will alternate briefly. When the level UP or Level DOWN button is pushed, the display will show the new level of stimulation. LO BAT appears when the transmitter batteries needs to be replaced.
Replacement Batteries: The ADV transmitters use two 6-volt alkaline batteries. These are commonly available where you brought your unit, where batteries are sold or call 1-800-826-5527 to order direct from us.
Undestanding the Receiver. The ADV units used a LED light to let you know the status of the collar.

• Blinking green light-collar is on and ready to use
• Pulsating red light - stimulation is being delivered
• Pulsating green -tone only being delivered
• Solid green light -over-correction timeout; wait 10 seconds
• Blinking yellow light - collar should be matched to transmitter.

• Hold the test light across the receiver probes
• Press the transmitter button for continuous stimulation
• Test light illuminate for the length of time stimulation is being delivered.
• The intensity of the light will increase as the level increases.

• Watch the included video to get the basics for training your dog properly with a remote trainer.
• Always praise your dog for good behavior!
• Teach him what the commands mean before introducing the collar as a reinforcement tool.
• Keep training sessions brief, about ten minutes of training and then a rest or play period of at least equal length.
• Dogs learn through repetition. You mway have better success if you can elicit an undesired behavior when you can anticipate it. For example, if the dog misbehaves and jumps on visitors, have someone come in and out of the front door several times over a half-hour period. You'll be expecting it and will be ready to teach your dog the right behavior.
• Always end a training session on a positive note. Let the dog have success. This way he'll forward to the next session.
• Training should be fun for both you and your dog. Never train when you are angry. If you get frustrated during training, stop and come back to it later. Your dog will learn better when you are both relaxed.
• We recommend your dog be at least 6 months old before starting a remote training program. You will be asking your dog to concentrate for periods of time and to remember what you have taught. Young puppies do not necessarily have the required mental development or attention span for these activities.
• The goal of training is to condition your dog to respond to your verbal commands under all situations. You should plan on using the collar for at least four months. A good rule is, once started with a remote trainer, to alwlays have the collar on when you take the dog out. This will ensure that he will always be imprinted with the correct response to your commands and that you are always in control.
• Take advantage of the Free Professional Training Support that comes with your Innotek remote trainer purchase.

• Adjust the collar strap to fit
• Test the receiver, if no light, recharge the batter in the receiver.
• If the transmitter LED is out, replace the transmitter batteries.
• Rematch the components as shown in Step 2 of the Quick Start Guide.
• Check that the probes are tightened.
• Ensure that the probes are touching the dog's skin.
• Trim the dog's hair or use the longer probes to ensure proper skin contact. Never shave the dog's neck.
• Use a stronger stimulation level.