Protect your vehicle's interior from pet hair, stains, and odors with our Pet Sleeper Car Robe.This durable quilted nylon pad covers your full-size bench seat using an elastic strap and hook attachment.
- Nylon quilt with polyester batting.
- Treated for water resistance to insure pet hair or spills fall away with a shake--leaving your seats clean.
- Rubberized backing minimizes slipping on all vehicle seat fabrics.
- Insulates your pet from summer and winter temperatures.
- Machine washable.
Installation Instructions
Front Seats: Place the top elastic strap over the top of the car seat. Where the head rest is adjustable, put the fabric under it and push back down, helping to hold the robe in place. Mold the fabric to the seat and tuck into the crease between seats. The bottom of the robe has a metal hook attached to an elastic strap that is used to hold the robe against the seat. Simply place the hook under the seat and attach it to any spot that will hold it. This will hold the car robe more securely to the bottom of the front seat.
Rear Seats: It helps to have two people attach the rear seat protector. Place the robe on the rear seat with the foam side up and folded in the middle. This will position the section with the elastic from side to side on top towards you and the front of the seat and three hooks towards the back of the robe away from you, hook side down. Insert the hooks so that they go between the upper back seat cushion and the lower seat cushion and hook on the back of the lower seat cushion. When installed, they are out of sight.
This should hold the robe securely when pulling against the hooked back. Pull the lower seat part tightly and slide the three flat hooks under the seat between the seat and the floor. These hooks don't actually hook on anything. They are just there to keep tension on the robe. The bottom section is now installed.
Fold up the top piece, which is the upper back seat cover, and insert the elastic strap around the edges of both sides of the rear seat. You can squeeze the elastic between the frame and the seat cushion. The elastic is attached to the middle of the robe holding it up in the middle against the seat.
Mold and tuck the robe into all areas between the seat and the frame where possible, top, bottom, and side and it will tighten. Your seat belt receptacles can be brought through for use for the left or right sides.
Your vehicle is now ready for use and should provide long-lasting protection for your seats.
Washing Instructions: Wash warm with no bleach and tumble dry. Remove promptly.