Metal cage is finished in bird-safe enamel. Decorative accents are made of durable, bird-safe plastic.
Easy-clean design and materials means minimum maintenance.
Assembles in minutes.
Ideal for parakeets.
Lay flat wire roof assembly into position on top of the wire cage body. The notched section of the flat roof will be in the front/right section of the cage, with the top door opening upward. Secure roof to body by engaging all of the wire loops between the narrow spaced roof bars. The front and rear latches attach to the second roof wires respectively. Crimp with pliers for maximum security. Please use a cloth when crimping with pliers, to protect painted finish.
Hold the two halves of the turret assembly in your hand, so that the shingles of the roof join in the proper position. Slide the larger brass ring up from the bottom of the assembly, and snap it into place just below the roof line. Then do the same with the smaller ring, snapping it into its groove at the bottom of the assembly. To attach to cage press the pie cut (v shaped) portion of the turret into the top right corner of the cage body, position the plastic hook over the small horizontal guide wire on front panel, and slide down into position. The top hook will naturally latch the second roof wire, and the turret will be straight and secure.
Place decorative top cornice into desired position, on the top left of the cage. Cornice will snap and secure into position between wires on the roof.
Attach windows/feeder cup doorss by snapping them into the two wire openings on the front and left side of the cage. When the feeding cups are in place, and the windows are in the closed position, the window create a snug and secure fit for the cup, and be able to slide up/down freely.
Attach front door by inserting the bottom of the door slightly into the cage, at an angle, and resting the two guide wires inside the cage. At this point the door will be resting comfortably in the open position. Close door by raising the drawbridge door unit and hooking the top wires.
Attach front stairs and railing to holes in steel pull-out drawer using screws provided (taped to stairs).
Slide the wire grill floor into position, so it rests on the grill slide channels in the metal base unit, and the handle is on the right side of the cage. Attach end caps to perches and install. Snap the decorative window frames in desired positions, according to personal taste.
Internet Price: $99.99 Today's Price: $79.99 (Save 20%)
Shop All Products By Prevue Hendryx
Usually Leaves Warehouse in 5-7 Business Days | More Shipping Info
16" L X 16" W X 21.5" H
5/8" Wire Spacing