With the Pawz Away Indoor Pet Barrier, your pet learns his “off-limits” areas like trash cans, furniture and other areas he must avoid. The system works using a transmitter that sends a signal 2-12 feet in diameter. Your pet wears a receiver collar with contact points that deliver a static correction should he enter the designated barrier area. Correction progresses should your pet stay in the “off-limits” area and times out for safety. Pets usually pick up the system quickly, and you will be on your way to a harmonious home.
Compatible with the Pawz Away Extra Receiver Collar (PWF00-13664), Pawz Away Outdoor Pet Barrier (PWF00-11923), Pawz Away Mini Pet Barrier (PWF00-13665), YardMax Rechargeable In-Ground Fence (PIG00-11115).
Instant Pet Proofing Barriers
Quick Start Guide
Step 1: Power Up
Install three AA alkaline batteries in the Zone.
Step 2: Set the Pet Proofing Range
Determine the desired location and size for pet-free zone. Hold the Zone so that the name is right side up. Press the arrow-shaped button that points upward. A segmented line will appear in the window. Each segment represents approximately two feet of diameter. The arrow-shaped button pointing downward will reduce the diameter of the pet-free zone. Once range is set, place Zone in desired area.
Step 3: Fit Collar on Dog
Thread the collar strap through the channels on the receiver. With the collar still turned off, place on dog and adjust to fit. For proper fit, the collar should be snug, yet loose enough to allow one finger to fit between the strap and dog's neck. Fit is important because a loose collar may cause inconsistent performance. It's okay to trim any excess strap length. After you are satisfied with the fit, you can now turn the collar on for first use. Move your dog to an area away from the pet-free zone before turning the collar on.
Instant Pet Proofing Barrier
Your Dog's First Session
Activate the collar by turning the receiver battery cover clockwise to the on position. Move your dog to an area away from the pet-free zone before turning the collar on. Allow your dog to enter the zone on his own.
Monitor your dog during his first session. Dogs learn at different speeds. It may take several times for your dog to honor the pet-free zone. You may also need to adjust the range so that your dog receives the warning sooner.
If you find that your dog is confused or unsure how to avoid the correction, it may be useful to put a long leash on your dog and show him how to avoid the Zone by gently guiding him out of the range once he has entered. Be sure to praise your dog for leaving the pet-free zone.
Important Information About Range
Your Zones transmitter communicates with your pet's collar via a radio frequency signal and under normal circumstances will cover an area up to 12 feet in diameter or a six foot radius. Due to the inherent properties of radio signals, some locations may affect the maximum range that can be achieved. This may be particularly noticeable around metal objects.
Should you find that you are not getting the desired range at the maximum setting, altering the Zone location by a few feet or changing how the Zone is positioned, i.e.: standing on end instead of laying flat may help cover your pet-free area.
Testing the Zone
You may wish to verify the range of the pet-free zone. Holding the collar, start outside the range and walk slowly toward the Zone. The collar will emit a high-pitched tone as it approaches the outer range of the pet-free zone followed by an escalating level of correction as it moves closer to the Zone. Note: The tone is easily heard by dogs, but may be a pitch that is difficult for you to hear. If you cannot hear the tone, hold the supplied test light on the collar probes and repeat this test.
Turning the Units Off
To turn the Zone off, continue to press and release the down arrow until no bars are present in the window. The Zone is now off. To turn the collar off, simply twist the battery cover to the center stop position.
The Zones collar uses two 3-volt lithium coin cell batteries size CR2032. These are commonly available where batteries are sold. To replace the batteries, twist the battery cover counterclockwise to the open position. Lift the cap out, remove the old batteries and insert new batteries positive side (+) toward the battery cap lid.
If the collar appears not to be working, try the following:
Internet Price: $104.99 Today's Price: $78.74 (Save 25%)
Shop All Products By PetSafe
Usually Leaves Warehouse in 5-7 Business Days | More Shipping Info
For Necks 6"-28"
For Pets 5 lbs. and Up
$25.83 to $31.86
$80.01 to $90.43