Built-to-last home for your chinchilla or ferret features:- Four levels of living space.
- Strong epoxy-coated metal panels.
- Washable, break resistant plastic base with deep design that helps keep debris off your floor.
- Three Comfort Shelves that add living and playing space.
- Three Safety Ramps with easy-clean, sure-grip finish.
- Two Snap-Lock Latches to secure wire top to base.
- Bowl-in-the-Hole food dish.
- Personalized name plate.
- Easy no-tools-required assembly.
Follow these simple step-by-step instructions for quick and easy cage assembly.- Unwrap the wire panels and lay on a flat surface with the doorway facing upward.
- Carefully unfold the front, back, and side panels.
- Lock the right and left side panels onto the back panel. Snap the wire hook through the wire loop.
- Next lock the front panel onto the side panels. Special Note: If the wire hooks have become bent during shipping, carefully pry them open to fit into the side panel wire loops.
- Flip wire set to upright position. Position the center Comfort Shelf on the 16th full-length wire bar up from the bottom in the center of the home, with the opening on the shelf facing the rear. Press down firmly until the Comfort Shelf snap-locks into position.
- Position the lower Comfort Shelf on the 9th full-length wire bar up from the bottom on the left side of the home, with the opening on the shelf facing the front. Press down firmly until the Comfort Shelf snap-locks into position.
- Attach two Shelf Clips to a Safety Ramp. Place the remaining Comfort Shelf in front of you so that the opening is in the front. Attach Ramp to Shelf on the right side so that it comes under the opening in the remaining Comfort Shelf.
- Position the assembled Comfort Shelf with Ramp on the 8th full-length wire bar down from the top on the right side of the home, with the opening facing the front. Press down firmly until the Comfort Shelf snap-locks into position.
- Attach two Shelf Clips to a Safety Ramp. Attach the Ramp to the center Comfort Shelf so that it comes under the opening on the center Comfort Shelf and leads to the lower Comfort Shelf.
- Insert four rubber feet into the four holes on the bottom side of the plastic base. Place the wire set inside of the plastic base so that the sticker and doors are facing front.
- Attach a plastic cage latch to the 5th wire bar up on each side of the cage. Be sure to snap latches under the lip on the plastic base to secure the cage to the base.
- Attach two shelf clips to the remaining Ramp. Attach the final Ramp to the center of the lower Comfort Shelf, so that it leads to the plastic base.
- Place the "Bowl in the Hole" food dish in the opening on the lower Comfort Shelf.
- Write your pet's name on the enclosed sticker and place the sticker on the name plate. Clip the personalized name plate to the wire anywhere on your pet's new home.Safety: To safely secure your pet inside the home, firmly press the "Z-Lock" latch behind the 2nd horizontal cage bar above each door opening. Secure the rooftop opening by pressing the "Z-Lock" latch down in the same manner and pressing the side clips down onto the wires next to the rooftop door.
Cleaning: To clean your pet's home, simply unsnap the wire top from the plastic base by lifting the two wire side latches. Empty and wash the plastic base or spray with Super Pet Clean Cage (sold separately), wipe dry, refill with fresh bedding material, and replace the wire top onto the plastic base.
Made in China.
Manufacturer's One Year Guarantee: All Care Critter Homes are guaranteed against defects in material and workmanship. Super Pet will replace components determined to be defective for one full year from date of purchase. Simply return defective part via prepaid postage (along with proof of purchase) to Customer Service Department.