PetSafe Ultrasonic Bark Control Pet Training System

• Unobtrusive table-top unit for indoor use.
• No collar needed.
• Creates a bark-free zone for one or more dogs.
• Device emits loud ultrasonic tone that only dogs can hear.
• Activated by dog's bark or manually by the owner.
• Operates on 9-volt battery which will last six months or 2,000 activations.
• Low battery light flashes to indicate low battery.

How It Works

1. The unit is activated when the internal microphone picks up the constant barking sound from the dog.
2. The activated unit emits a two-second ultrasonic sound that can only be heard by the dog.
3. Startled by the high-pitched sound, the dog should stop barking, as it will associate its bark with this unpleasant noise.

After removing the battery door, install a 9-volt alkaline battery and replace the door.

Note: When the battery voltage is low, the red indicator light will flash once every six seconds signifying that the battery should be replaced.

Operating the Unit

1. Place the unit in the area where the dog is barking.

   Note: The unit should be ten feet or less from the barking dog.

The unit is equipped with a Manual Correction button that can be used to correct unwanted behaviors such as lying on the furniture or getting into the trash can. Simply push the Manual Correction button and the unit will emit a two-second ultrasonic sound. If the button is held down, the unit will repeat the process in two-second intervals (two seconds on, two seconds off, two seconds on, etc.).

Note: While in Manual Correction mode, the unit should be 20 feet or less from the misbehaving dog.