CatIt Fresh & Clear Small Drinking Fountain for Cats

CatIt Fresh & Clear Small Drinking Fountain for Cats

Provide an indoor source of moving water that will encourage your pet to drink more with the CatIt Fresh & Clear Small Drinking Fountain. The large water-to-air surface area maximizes oxygenation for fresher, better tasting water. Water is cooled and aerated by the re-circulating system while the multi-stage filtration consisting of a dual-sided foam and activated carbon filter rids your pet's water of debris and impurities. Also suitable for small dogs.

1. Remove unit from box. Remove poly bag from filter and set aside.
2. Fountain should be cleaned before using to remove any dirt or debris. To dismantle fountain - remove top, twist counter-clockwise to remove filter holder, remove power cord holder, lift up and remove pump.
3. Wash the complete unit, including base, top, filter holder and pump (excluding filter) with a sponge. Do not use abrasive cleaners or materials on any part of the unit. Rinse thoroughly.
4. Replace pump.
5. Re-thread power cord into groove in base.
6. Slide power cord holder into groove in base. Ensure notches on the outside of tip of the power cord holder line up the notches on outside of base, then press down firmly to lock into position.
7. Replace filter holder. Ensure notches on filter holder line up with grooves on inside of base, and twist clock-wise to lock into position.
8. Place filter on top of filter holder, and press down firmly to ensure the filter is secured underneath the tabs. Note: Install filter with foam-side facing up and carbon-side facing down.
9. Replace top of fountain.
10. Place fountain directly beneath faucet and fill. As the fountain fills with water, the red water level indicator on the top of the fountain will begin to rise. Fountain is filled to capacity when the red water level indicator is fully visible. Note: If you prefer, you can fill the fountain by using a pitcher rather than placing it under the faucet.
11. Attach power cord to AC adapter, and plug in unit.
12. Secure excess power cord with tie wrap and place beneath unit to avoid pet chewing and entanglement. Do not allow any objects to come in contact with the unit as water may spill out of unit.